level and flor temperature and humidity control Logger Comet

These COMET Data Logger are designed for recording and direct measurement (depending on model) of temperature and relative humidity of the air, in combination with voltage signals 0-5V optionally. They have a non-volatile memory with 32000 record capacity values. The measurements recorded in memory can be downloaded to a PC via USB interface, RS232, Ethernet or GSM and proceed to further treatment with SW001 software supplied with the equipment.

-Common features of these Data Loggers are:

. Memory capacity of 32000 values.

. Two recording modes: cyclic or noncyclic.

. Basic accuracy ±0,2ºC.

. Battery life up to 7 years.

. Display models with maximum and minimum visualization values.

. Two alarm thresholds per channel with overrun indication on the display or LED (models without display)

. 2 years warranty

-Modes of communications with the PC.

· USB port.

· RS232 serial communication.

· Over Ethernet. Using this type of communication, users will be able to define the desired temperature ranges, and if exceeded, they will alert us with an email to the address indicated.

-Applications: food industry, pharmaceutical industry, heating, ventilation, air conditioning, refrigeration, construction and management of energy, research and development, laboratories, technological processes, museums, archives, galleries, etc.

-Includes:

· Certificate of traceable calibration accordant to; EN ISO/IEC 17025 
· Protection: IP67

-Loggers with display:

model......................description
S3120......................-30 to +70ºC/0 - 100%
S3121......................-30 to +105ºC/0 - 100%
S3631......................in(-30 to +70ºC) out(-90 to +260ºC)/0 - 100%
S3541......................in(-30 to +70ºC)/0 - 100%


-Loggers without display:

model......................description
R3120......................-30 to +80ºC/0 - 100%

R3121......................-30 to +105ºC/0 - 100%