0-1 Output level switch +/- 25º ATMI Soba

This level regulator is designed for charged liquids. When the liquide reaches  the regulator, the pear tilts and the mechanical contact will close or open the circuit, thus controlling the stop or the starting of a pump or an alarm.

If  two floats are used, one operating as a low level, the other as a high level, it is also possible to regulate severals levels.

The SOBA level regulator are equipped with an external loaded resin ballast 250 g, adjustable on the cable, which facilitates the rotation point of the level sensor and allows it to work in a wide range of densities.

Thanks to its +/- 25º switching angle, the SOBA ensures a very precise level measurement. The device can also be used in high or low alarm (overfill protection or protection against idling).

No wear, no maintenance! In wastewater pumping stations, in groundwater or irrigation, in fact, in most level control applications, this float is the ideal solution.

FEatures

• Permissible fluid density 0.70 to 1.10.
• Maximum working pressure 3.5 bar.
• Maximum temperature 85ºC.
• Protection Index IP 68.
• Electrical characteristics 12, 24, 48 VAC / VDC - 250 VAC / VDC 50/60 Hz.
• Operating angle +/-25º.
• Cutting power 16 (6) A (16 A resistive - 6 A inductive).
• Dimension Height: 170mm - Diameter: 80mm.
• Weight without cable 200g.
• Cable length 5, 6, 10, 13, 15, 20, 25 and 30 cm.
  

APPLICATIONS

• Water treatment.
• Control for quick detection.
• Filling / emptying control