ATmi – control AND REGULATE THE QUANTITY OF LIQUID IN A TANK
In liquid pumping stations it is not uncommon for a layer of grease to form. to control and regulate the quantity of liquid in a tank, it is necessary to have a material capable of passing through it like the AQUA float regulators.
The float regulators of the AQUA range enable you to control and regulate the quantity of liquid in a tank or other container. Moreover, their operating principle is simple. You juste have to simply position the floats at the selected high and low levels.
When the liquid reaches the float regulator AQUA, it activates a circuit to close the pumps. When the liquid level drops, the low-level float regulator will tilt and trigger the filling pump. In many pump stations, a layer of grease can form above the liquid at the surface.
To measure the liquid level, a material that can passing through the grease layers such as the AQUA Medium and
AQUA XL float level regulators is recommended.
The AQUA Medium level regulator is adapted when the grease layer is not very important. Easy to install, it can be used in clear and clean waters as well as in sewage or wastewater or in certain oils and muds.
As for the AQUA XL level regulator, it is able to pass through the thickest grease layers thanks to its heavy weight (775g). By positioning several level controllers, it is possible to have a high alarm raised when the liquid level is too high and close the filling pumps and a low alarm when the liquid level is too low and activate the Filling pumps.
In case you need more information do not hesitate to contact us by mail info@garmasl.com o call us to 943291102.
